Changelog
Every release, newest first. Glancet is early beta — expect frequent, small releases. What's planned next lives on the public roadmap.
0.3.3 — STATS AND PLAN PREVIEWS
A heatmap of what your agents ran, plans you can read from the notch, and exact jumps into Spalt and Zellij.
New
- Stats. The panel's footer switches between Limits and Stats: 36 weeks of days as a heatmap, a 7d / 30d / All range, a streak, and tokens, prompts, sessions, active days, peak hour and top model — for Claude Code and Codex, one at a time. They are counted from the transcripts already on your Mac and kept as daily totals in
~/.glancet/stats.json: no project names, no prompt text, nothing sent anywhere. Settings → Limits and stats turns them off. - Plan previews. A plan an agent puts up for review shows in its row and in Peek, with Read plan and Open in… buttons.
- Spalt, to the exact terminal. Jumps land on the exact Spalt terminal, window and tab included. Needs Spalt 0.3.4 or later; older versions get the app.
- Zellij, reliably. Jumps reach the exact pane, tab included, and are checked after the move; the “Open in” buttons name Zellij for Zellij panes.
- Sessions restored at launch keep their terminal and pane, so a jump still lands in the right place.
Fixed
- An older Claude usage reading can no longer replace a newer one, and a limit milestone re-arms only when its window really resets.
- The model-family bar is hidden below 1%.
- In the macOS sound pack, events you haven't picked a sound for play Ping, Glass and Basso.
0.3.2 — A SHORTCUT YOU CAN CHANGE
A new default shortcut you can change, and a volume slider.
Changed
- The shortcut that opens the panel is now ⌃⌘G (it was ⇧⌘G), and you can record your own in Settings → Shortcuts. Glancet refuses ⌘1–⌘5, which jump to sessions, and combinations macOS keeps for itself.
- Sound volume: a slider in Settings → Alerts that plays a sample when you let go.
0.3.1
Released as build 116. Separate release notes are unavailable; its source revision has not been verified.
0.3.0 — LIVE ARCADE
A redesigned panel and Settings, Peek cards under the notch, Esc noticed in Claude Code, three beta agents and more exact jumps.
New
- Peek. An approval, a question, a fresh result or a Claude limit milestone opens as one small card under the notch, and in the external capsule. Allow or Deny right there; the full panel is for browsing. Switchable in Settings → Notch and displays.
- A redesigned panel. Sections run Needs you, Just finished, Running, Open, Earlier. Running sessions are cards that show task progress (“3 of 6 tasks”) when the agent keeps a todo list, and can be grouped by project or agent; a long section folds to five rows. The alien also squeezes while an agent compacts its context, and winces when a tool call fails.
- Approvals, in more detail. File changes show the diff before you approve. “Always” saves the rule Claude itself suggests, spelled out under the buttons. Requests from parallel subagents queue on the parent row, each held for 15 seconds before the terminal takes over. Claude's questions also take a typed answer.
- Esc is noticed. Stopping Claude Code mid-turn fires no hook; Glancet now watches for it and returns the row to idle, with no “done”. Claude Code sessions restored at launch come back as they are — mid-turn or waiting on you.
- Three beta agents: Grok Build, pi and Oh My Pi. Written from their hook and extension formats but not yet run against a real install, so they carry a beta tag. No approvals or usage limits for them.
- More exact jumps. Zellij (0.44 or later) and cmux reach the exact pane; Ghostty reaches the terminal open in the session's folder when exactly one is; Codex Desktop opens the exact conversation; VS Code, VS Code Insiders, Cursor and Windsurf raise the window that has the project open.
- Several Claude accounts. Claude config directories besides
~/.claudeare watched too — offered when Glancet finds one, never connected unasked. Usage limits stay the default account's. - Settings as a game menu: eleven pages behind a searchable sidebar, agents shown with their health and a Repair button. First run is a three-step setup.
- Make it yours: a hat for the alien, a choice of what sits beside it in the notch, an optional label on the external capsule, and a “Today” count of finished turns, answered prompts and failures, kept on this Mac.
- Sound packs: Arcade, Glancet's own cues, or any macOS sound per event. Still off by default, and quiet for the session you're already looking at.
- Statusline sharing. If another tool already uses Claude Code's status line, “Share it” keeps it rendering exactly as before while Glancet reads the same feed; “Stop sharing” puts the original back.
- Hover to open has an adjustable delay, an optional wider target and a haptic tick, or can be switched to a click.
GLANCET_SKIP=1in an agent's environment keeps that process out of Glancet, for scripts and CI.- The download on this site is now a disk image. Updates and Homebrew stay on the zip.
0.2.4 — READING A PLAN
A calmer look while you read a proposed plan, background shells you can see, and two more hosts.
New
- Reading a plan. When Claude Code puts a plan up for review, the notch keeps the needs-input pulse for four seconds, then settles into a calm teal “reading plan” pose — in the notch, on the row and in the menu bar. The session still counts as waiting on you. Detection uses the approval hook, so it needs approvals switched on.
- Background shells you can see. When a Claude Code turn ends with a shell still running in the background — a dev server, a long build — the finished row carries a “shell running” tag, because the agent will report back when it exits. The turn still counts as finished.
- Spalt and T3 Code. Sessions in Spalt's terminals used to be mistaken for iTerm2 and jumped to the wrong app; they now carry Spalt's name, jump there, and switching to Spalt calms finished sessions. T3 Code sessions are labelled “T3 Code”. Both get the project's window raised, not an exact pane.
- The panel is ordered by what needs you: waiting sessions first, then recently completed, then working, then open, then the archive.
Fixed
- Switching usage tabs no longer moves the tab bar out from under the pointer.
- Settings' state legend gains “Reading plan”, and each pose plays while you hover it.
0.2.3 — QUIETER WHEN IDLE
Less CPU while nothing is happening, and no more minute-by-minute licence checks after a failed one.
Fixed
- Lower idle CPU. A closed Settings window is released instead of kept alive, animations stop while their surface is hidden, and the notch works out its hover zone once rather than on every mouse move.
- Licence checks back off. After a failed check Glancet no longer tries again every minute; retries are now hours apart.
0.2.2 — ZCODE, A WELCOME TOUR AND SWIPE TO REMOVE
ZCode joins the agents, first run becomes a guided setup, and rows can be swiped away.
New
- ZCode. Connects through ZCode's own hook config. Its permission prompts show as needs-input, but ZCode publishes no reply format, so approvals stay in the terminal; z.ai has no public usage endpoint, so there are no usage bars for it.
- A six-step welcome tour: welcome, what Glancet can do, connect your agents, displays, alerts & startup, all set — then a window-focus card if Accessibility is still missing. Skippable at any point; Settings → “Welcome tour” shows it again.
- Swipe to remove. Swipe a session or history row left to remove it. A removed session stays removed until you prompt it again, and anything it was waiting on goes back to the terminal.
- Live Claude sessions are tracked by process. A session that is mid-turn when Glancet launches comes back as working, and a working session whose process has gone away is cleared instead of lingering.
- The usage strip hides when no agent with usage limits is installed, and shows the Claude and Codex tabs as soon as those agents are, before any figures arrive.
Fixed
- A fresh completion no longer hides work in progress. A finished session used to outrank still-working ones in the notch and menu bar until you acknowledged it. It now flashes for four seconds (or stays, if nothing else is working), and the done animation is a hop.
0.2.1 — CODEX GETS THE FULL TREATMENT
Codex usage limits and approvals, live Claude usage while you work, and a first-run tour.
Codex
- Codex usage limits. The panel's usage strip grows a Codex tab with the official rate-limit windows and your plan, read from Codex's own local app-server — spawned read-only, only while Codex is signed in, and Glancet never sees a Codex token.
- Answer Codex approvals from the notch. Allow / Deny on a blocked tool call, exactly like Claude. Codex's hook format doesn't accept “always allow” or structured questions yet, so those deliberately stay in the terminal.
Claude usage, live
- Bars that move while you work. Claude Code pipes its rate-limit snapshot into the status-line command on every turn; Glancet claims that slot only if it's empty — never over a statusline you configured — and the bars then update within seconds, with polling standing down while the feed is fresh.
- Milestone chimes at 85 / 90 / 95%. While a Claude turn is working, a crossing shows for six seconds in the notch or capsule with one custom chime. The bars carry matching tick marks; polling honours the endpoint's own back-off when it is rate limited.
New
- A first-run tour: welcome, connect your agents, done — three steps, closable at any point, never shown again. New agents installed later get a one-time nudge.
- Real agent marks. Session badges now use each agent's own monochrome mark from the ACP Registry instead of letter monograms.
- Per-session context in the usage strip: a Sessions tab lists every live session's real token count against the standard 200k window.
- Orca terminal support: jumps land on the exact Orca pane.
- Approvals are now on by default (they fail open at every layer, and the switch is still in Settings).
Fixed
- The notch open/close animation. The panel is one fixed-size window animated in SwiftUI, so the expand can no longer jump, clip its corners mid-flight, or leave a bar across the top of the screen — and hover detection is event-driven instead of a permanently ticking timer, so idle Glancet no longer wakes the CPU.
0.2.0 — THE STORE IS OPEN
A one-time $10 unlock after the 7-day trial, and the launch-day fix for the flooded panel.
Buying
- $10, once. The trial is unchanged — full app, 7 days, no card. After it a licence key unlocks Glancet for good; checkout is by Lemon Squeezy, LLC, with a 30-day refund policy. The free-beta grant that 0.1.2 added is switched off in this build, so a trial that has already run out shows the unlock screen straight away.
- One click to unlock. The order page's “Open Glancet” button hands the key to the app; pasting it into Settings → License works too.
- One Mac at a time, and the licence moves with you. Deactivate on the old Mac, or choose “Use this Mac instead” on the new one — the old Mac stops within a week. That also covers a Mac you no longer have.
Fixed
- The wall of stale sessions after a launch. Relaunching restored every transcript from the last 24 hours as an “open” session, with a running timer, for up to a minute before the sweep removed them — and the panel could grow past the top of the screen. Only sessions active inside the auto-clear window come back now, idle rows carry no timer, and the panel stays anchored under the menu bar.
- Settings: the License section sits second, and the menu-bar menu lost two rows that had nothing to do.
0.1.2 — EARLY BETA
Free while in beta, sessions survive a relaunch, and Macs without a notch get a surface.
Free while it's beta
- The 7-day trial no longer locks the app while the store is closed. It said “nothing to pay” on this site and then expired anyway; now the two agree.
New
- Sessions survive a relaunch. Glancet used to learn about a session only when its next hook fired, so after an update or a crash the panel said “no active sessions” while several agents were mid-turn. It now reads the agents' own transcripts on launch and lists what was already open.
- Reply without switching apps. A finished session grows a reply field — type a follow-up and it is typed into that session's terminal. Only for finished sessions, and only where the exact pane can be addressed (tmux, iTerm2).
- Macs without a notch. An Air or a desktop Mac now gets the same always-on capsule under the menu bar. Previously there was only the menu-bar icon and the hotkey.
- Terminal.app lands on the exact tab, matched by its controlling terminal rather than just raising the window.
- Connection health. “Connected” and “working” aren't the same thing: a hand-edited config or a missing forwarder used to look identical to a healthy setup that simply showed nothing. Settings now names the problem and offers a repair.
- The menu-bar icon can be hidden, leaving the notch and ⇧⌘G. Launching Glancet again from Spotlight always reopens Settings.
- Homebrew:
brew tap glancet/glancet && brew install --cask glancet.
Fixed
- The menu-bar icon was black on a dark menu bar. macOS derives the menu bar's background from your wallpaper, not from Light/Dark mode, so a dark picture in Light Mode left a black alien on a black bar. It's a template image now and macOS tints it.
- Every agent integration has now been run end to end, so none of them is marked beta.
Note for anyone already running Glancet
0.1.2 changes the key used to sign updates, which older copies can't verify. If you installed 0.1.0 or 0.1.1, the in-app updater won't offer this one —download it once from here and updates resume as normal afterwards.
0.1.1 — EARLY BETA
Packaging fix. No changes to the app itself.
If you downloaded before 21 August 2026, please download again
Earlier downloads of 0.1.0 and 0.1.1 were packaged in a way that damaged the app's signature while it was being unzipped, so macOS refused to open them and reported that it “could not verify Glancet is free of malware”. That warning was real, and it was our fault — not a false alarm and not something to click past.
The app inside was always correctly signed and notarized by Apple; the archive around it was not built correctly. Nothing was ever wrong with the software you downloaded, and nothing on your Mac was at risk. The download on this site is fixed. If you hit that dialog, drag the old copy to the Trash anddownload Glancet again — it opens normally now.
If the app did open for you, you are already on a good copy and there is nothing to do; future updates arrive through the app as usual.
0.1.0 — EARLY BETA
First public release.
Agent status
- Live per-session state — working, needs input,done, failed, idle — for as many concurrent sessions as you run. A turn that ends in an error is its own state and ranks above finished work rather than hiding under it.
- 10 agents: Claude Code, Codex, Gemini CLI, OpenCode, Cursor, Kimi CLI, Qwen Code, Qoder, CodeBuddy, Factory. Claude Code and Gemini CLI had been exercised end-to-end; the rest were marked beta in Settings until 0.1.2. Agent badges appear only when more than one agent is present.
- The prompt you typed and the agent's closing message on every row.
- Context carried by the last request, graded against the 200k default window — the real token count, never a percentage of a guessed limit.
- Permission mode called out when it isn't the default: plan, accept-edits, bypass.
- Model tag and git branch per session, both read locally.
- Live subagent fold-out for sessions that fan out.
- Elapsed time for the current turn.
Presentation
- Alien and elapsed time render in the MacBook notch; hover to expand the full panel.
- External displays show a capsule only for results that need you — a permission prompt, a completion, or a near-limit warning — never while an agent is merely working.
- Colour-coded menu-bar icon as the always-on indicator, notch or no notch.
- Multi-display aware: hot-plug, clamshell and rearrangement handled.
Interaction
- ⇧⌘G opens the panel on the screen under your cursor; Esc collapses it.
- ⌘1–⌘5 jumps to a recently finished session — the exact pane in iTerm2, tmux, WezTerm, kitty, the project's window everywhere else.
- Answer Claude Code from the notch (off by default): Allow / Deny / Always on a blocked tool call, naming the exact call with a countdown, and the agent's own options when it asks you a question. Fails open at every layer — silence never approves anything.
- Recently completed sessions persist across restarts.
- Inline rename, keyed to the project so it survives restarts.
- Switching to your terminal acknowledges finished sessions; needs-input stays loud until answered.
Usage
- Claude Code 5-hour, weekly and model-family limits with reset countdowns and near-limit highlighting.
- Optional system alerts at 75%, 90% and 100% of a window — the only notification Glancet posts.
- Conservative polling, and a switch that disables the feature and the credential read entirely.
System
- One-click hook install per agent that merges into the agent's own settings file, with a backup, leaving other tools' hooks untouched.
- Auto-update through Sparkle, with every update cryptographically verified before it installs. Glancet checks once a day by default and always asks before installing; Settings → Updates turns the check off.
- Two counts, both set out in the privacy policy: how many copies run each day (measured on our own server from that update check, using a hash deliberately unreproducible the next day, with your IP address never stored) and how many installs there have been (a single “+1” on first launch, carrying no identifier). Settings → Privacy turns the second off.
- 7-day trial, then a one-time unlock; the licence is valid on one Mac at a time and moves freely between them.
- Optional sound cues for done and needs-input, off by default.
- Optional suppression of Claude Code's own notifications.
- Launch at login. No Dock icon. macOS 13 Ventura or later, Apple silicon.